


Light penetration depth: the interplay with different metrics and why they matter in GHs
July 2025 - Joris de Leeuw, Romy Steenkamer, and Giacomo Bosco
At FOTONIQ, we work to optimise light conditions inside greenhouses using advanced coatings such as PAR+. These coatings promote crop growth by diffusing incoming light while minimising light loss compared with other diffusive coatings. However, it is equally important to understand how light travels through the crop canopy, particularly in tall or dense crops. This is where the concept of light penetration depth becomes relevant.
What is light penetration depth?
Light penetration depth refers to how far light travels into a plant canopy before its intensity decreases significantly. It is typically defined as the depth at which the incoming light intensity has dropped to 37% of its original value at the top of the canopy.
This concept is particularly important in high-wire crops with a vertical growth structure, such as tomatoes, cucumbers, and peppers. Within these crops, sufficient light reaching the lower leaves is essential for uniform growth, efficient energy use, and high yields.
Why this matters
With PAR+ our goal isn’t just to increase the amount of light entering the greenhouse - but to help that light reach deeper into the crop where it can do the best. By focusing on vertical light distribution and understanding how light penetrates plant canopies, we give growers the tools to get more out of every photon.
Measuring light penetration depth
There is no single ‘right’ tool for measuring light penetration depth, but the concept behind it is clear. It is a relative measure, independent of how much light enters the greenhouse through the roof. Instead, it depends on how the crop affects the distribution of light.
Vertical light distribution / attenuation curve
The vertical light distribution describes how light intensity decreases with depth in the crop canopy. By placing sensors at different heights inside the greenhouse, we can create a light attenuation profile.
An attenuation profile helps illustrate how evenly light is distributed across different heights of the canopy. Diffuse light redistributes some of the excess light from the top to the lower levels of the canopy. This has two main advantages:
1) It increases the photosynthetic capacity of the lower leaves.
2) It helps prevent stress and inefficient light use at the top of the canopy.
Under direct light, excess light at the top of the canopy can cause light stress and eventually lead to photoinhibition. Photoinhibition is a protective response in which photosynthetic efficiency decreases in response to excessive light exposure. In ornamental plants, severe photoinhibition can cause leaf discolouration and burn marks, reducing their aesthetic value.
Diffuse light helps mitigate these effects.
Canopy light interception
While it is not a direct measure of light penetration depth, canopy light interception tells us how much of the incoming light is captured by the crop. Greater light penetration generally means that more light reaches the lower leaves, potentially increasing overall light interception.
However, light interception and penetration depth are not the same. Light interception describes how much incoming light is captured by the crop, while penetration depth describes how deeply light travels into the canopy. Nevertheless, these two metrics can be used together to help growers understand the overall light use efficiency of their crops.
Would you like to know more? Get in touch with us below.
